Viviane Lenders

Introduction The Standard Drive Interface is an electrical interface for roller shutter andblind drives for the transmission of telegrams. In the following description of theSMI interface, you will find essential technical data describing the principle of the system. The SMI…

Requirements for the Control Unit The following table provides planners with guidance on which points to consider when selecting theappropriate control unit. Furthermore, the planner must also consider the repurposability of the control system. The room layout in office buildings…

Control of one or more drive(s) via a KNX/SMI control unit Push-button operation is activated by switching the supply voltage off and on. The drive switches to SMI operating mode as soon as a valid SMI bus voltage is detected…